Venus OS v2.62 – Inverter & MPPT RS

Good morning!

Today is the day for releasing Venus OS v2.62. For those not familiar, Venus OS is the software running on our Cerbo GX monitoring system, as well as its predecessors the Color Control GXVenus GX and others.

Aside from various minor stability improvements, there are two changes to highlight:

Inverter RS and MPPT RS

The Inverter RS Smart Solar, and the SmartSolar MPPT RS are two recently launched new products; and with this new version they are much better supported. Both can now also be connected using their VE.Can port, rather than only through their other communication port. Also, the Inverter RS is fully integrated when it comes to its Battery Monitor function.

There is still work to do, such as having all PV details of an Inverter RS on the VRM Portal, as well as seeing the daily history when connected on its VE.Can port.

Here are two screenshots showing the history for each of the trackers. Note that these were taken on an MPPT RS 200A, having four trackers. This 200A model is not available to purchase yet but is planned for later this year.

Remote VEConfigure: automatically detect a replaced unit

This feature is directed towards installers and operators of large systems. In the unfortunate event that one inverter/charger module in a larger parallel-, split- or three-phase system needs replacing, this can now be done remotely. The steps involved are:

  1. Read the configuration of the whole system (or use an existing Remote VEConfigure file)
  2. Physically replace the failed unit
  3. Write the configuration. At this step the system will automatically detect that a previous device is missing, and it will discover a new device with an unknown serial number. It will assume that the new device is a replacement, and write the settings accordingly.
  4. (optionally) Read the new configuration file and store in your records.

Note that before starting above, make sure to update the new unit to the same version of VE.Bus firmware, which unfortunately can’t be done remotely.

How to update and conclusion

Besides the two items above, there are many more changes. All rather minor and related to certain specific situations or systems. To read them, find the full change log by logging into Victron Professional and selecting ‘Firmware’.

Information about how to install the firmware is in the manual of your GX Device. Quick links to the relevant pages: Cerbo GXColor Control GX and for the Venus GX.

That’s it for now, all the best!

Matthijs Vader

Don’t hesitate to contact us with any questions you may have.